62 | Drystar AXYS | Introduction
1. Hold the CF-card vertically with the connector holes in front of the slot
and with the flat surface pointing to the left. In that case the cut-away (a)
and the rim (b) are pointing to the right.
2. Insert the CF-card gently into the slot.
Removing a Compact flash card (CF-card)
Remove the CF-card gently from the slot.
2852D EN 20161128 1416
Note: If you cannot push the CF-card completely into its
position, this means that you have to turn it 180 degrees
(while keeping the connector holes faced to the slot).