Ryobi RACPWS3 Manual page 8

1
Wear full eye and ear protection,
protective gloves, substantial footwear,
and long trousers at all times while
operating the product. Do not operate
the product when barefoot or wearing
open sandals.
6
2
Install the preferred accessory. To install the surface cleaner, insert the surface cleaner extension into the spray angle and
turn it clockwise until it clicks into place. Insert the surface cleaner into the extension and turn it clockwise until it is secured.
To install the fixed brush, rotary brush, or detergent bottle, insert the brush or bottle into the spray angle and turn it clockwise
until it clicks into place. To install the vario lance or turbo lance, insert the RACPW to RPWA series adapter into the spray
angle and turn the adapter clockwise until it clicks into place. Insert either the vario lance or turbo lance into the adapter, and
turn the lance clockwise until it clicks into place.
10
4
2
1
3
Install and secure the garden hose
connector on the other end of the
garden hose. Connect and secure the
garden hose to the water source.
8
Getting started
2
Push down the trigger handle holder
until the buttons click, securing the
handle in place. Push down the power
cord holder until the buttons click,
securing the handle in place.
1
2
3
11
Connect and turn the water inlet filter
clockwise to secure it to the water inlet
port. Avoid cross-threading the filter
and port to avoid water leaks.
3
Attach the carry handle onto the
product.
4
12
2
1
Connect one end of the garden hose to
the inlet coupler and the other end to the
garden tap. Turn on the water source to
allow water to flow into the product.
3
4
2
1