Table of Contents
Advertisement
GeoFence sensitivity can be changed. Sensitivity can be
set to
Low, Medium or High . The higher the sensitivity,
the easier the alarm is activated.
Note:
When you put the product into storage for
a long period, it is recommended to switch off the
main switch to save battery power. With the GeoFence
function on, a PIN code is necessary to switch off
the product. If you switch off the main switch, the
®
Automower
Connect stays on for 12 hours. After that
it is not possible to communicate with the product and
the GeoFence function is not on.
1.3.2 Symbols on the display
These symbols are shown on the display of the product
®
when Automower
Connect is enabled.
The signal strength of the GPRS
reception.
Problem with the connection to the
Internet server.
1.5 Technical data
Frequency Band Support
®
Automower
Connect 2G
®
Automower
Connect 4G
Power Class
®
Automower
Connect 2G
®
Automower
Connect 4G
Deviations from this general technical data are included in the country specific chapters.
1529 - 003 - 14.10.2022
1.4 Operation
1.4.1 Main menu
•
•
•
1.4.2 My mowers
My mowers shows the status of the product, you can
remove or add products paired to the account.
GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz
Band 12 (700 MHz), Band 17 (700 MHz), Band 28 (700 MHz), Band 13 (700 MHz),
Band 20 (800 MHz), Band 26 (850 MHz), Band 5 (850 MHz), Band 19 (850 MHz),
Band 8 (900 MHz), Band 4 (1700 MHz), Band 3 (1800 MHz), Band 2 (1900 MHz),
Band 25 (1900 MHz), Band 1 (2100 MHz), Band 39 (1900 MHz)
Power Class 4 (for GSM/E-GSM)
Power Class 1 (for DCS/PCS)
Power Class 3
Problem with the SIM card or the module.
Dashboard : Shows the current status of the
product. It shows symbols for the battery status
and cutting height.
Map : Shows the current position of the product and
the set centerpoint for GeoFence. You can monitor
the movement of the product with this function, for
example in case of theft.
Messages (only available for Bluetooth
range connectivity): In this menu the fault and
information messages can be found. For some of
the messages, there is information to help you to
correct the fault.
33 dBm
30 dBm
23 dBm
®
short-
Operator's manual - 3
Advertisement
Table of Contents
