MSI 800 User Manual page 64

except CPU will be shut off. Settings: [Disabled], [1], [2], [4], [8], [12], [20], [30], [40 min],
[1 Hour].
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off]
[Suspend]
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off]
[On]
[Last State]
Wake Up Event Setup
Press <Enter> and the following sub-menu appears:
Resume From S3 By USB
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled].
Resume From S3 By PS/2 KB
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected. Us e the <PageUp> &
<PageDown> keys to select the options. W hen selecting [Password], enter the
desired password. Setting options: [Password], [Hot Key].
Resume By PS/2 Keyboard
This setting only works Resume From S3 By PS/2 KB is set to [Hot Key]. This
setting specifies how the system will be awakened from power saving mode
when input signal of the keyboard is detected. Setting options: [Disable], [Ctrl+F1],
[Ctrl+F2], [Ctrl+F3], [Ctrl+F4], [Ctrl+F5], [Ctrl+F6], [Ctrl+F7], [Ctrl+F8], [Ctrl+F9],
[Ctrl+F10], [Ctrl+F11], [Ctrl+F12], [Power], [Wake], [Any Key].
Resume By PS/2 Mouse
This setting only works Resume From S3 By PS/2 KB is set to [Hot Key]. This
The power button functions as a normal power-on/-off
button.
W hen you press the power button, the computer enters
the suspend/sleep mode, but if the button is pressed for
more than four seconds, the computer is turned off.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before power
failure or interrupt occurred.
4-17
Chapter 4 - BIOS Setup