Entering Setup; Control Keys - MSI 800 User Manual

Power on the computer and the system will start POST (Power On Self Test) process.
W hen the message below appears on the screen, press <DEL> key to enter Setup.
If the message disappears before you respond and you still wish to enter Setup,
restart the system by turning it OFF and On or pressing the RESET button. You may also
restart the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.

Control Keys

< > Move to the previous item
< > Move to the next item
< > Move to the item in the left hand
< > Move to the item in the right hand
<Enter> Select the item
<Esc> Jumps to the Exit menu or returns to the main menu from a
submenu
<+/PU> Increase the numeric value or make changes
<-/PD> Decrease the numeric value or make changes
General help, only for Status Page Setup Menu and Option Page
<F1>
Setup Menu
Load Previous Values
<F5>
Load Fail-Safe Defaults
<F6>
<F7> Load Optimized Defaults
<F10> Save to CMOS and Exit

Entering Setup

Press DEL to enter SETUP
4-2