Warnings - Graco Xtreme-Duty 25A598 Operation And Parts

Warnings

Warnings Warnings Warnings
The following warnings are for the setup, use, grounding, maintenance, and repair of this
equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols
refer to procedure-specific risks. When these symbols appear in the body of this manual or on
warning labels, refer back to these Warnings. Product-specific hazard symbols and warnings not
covered in this section may appear throughout the body of this manual where applicable.
FIRE AND FIRE FIRE AND EXPLOSION AND
Flammable fumes, such as solvent and paint fumes, in work
Paint or solvent flowing through the equipment can cause static sparking. To help
prevent fire and explosion:
• Use equipment only in well ventilated area.
• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps,
and plastic drop cloths (potential static sparking).
• Ground all equipment in the work area. See Grounding
• Never spray or flush solvent at high pressure.
• Keep work area free of debris, including solvent, rags and gasoline.
• Do not plug or unplug power cords, or turn power or light switches on or off when
flammable fumes are present.
• Use only grounded hoses.
• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail
liners unless they are anti-static or conductive.
Stop operation operation immediately
• Stop Stop operation
equipment until you identify and correct the problem.
• Keep a working fire extinguisher in the work area.
SPECIAL CONDITIONS
SPECIAL SPECIAL
Equipment must comply with the following conditions to avoid a hazardous conditions
which can cause fire or explosion.
• Electrostatic charging hazard. Clean surfaces with a damp cloth and read instructions
for additional techniques to mitigate risk of electrostatic discharge.
PRESSURIZED EQUIPMENT PRESSURIZED PRESSURIZED
Fluid from the equipment, leaks, or ruptured components can splash in the eyes or on
skin and cause serious injury.
• Follow the Pressure
cleaning, checking, or servicing equipment.
• Tighten all fluid connections before operating the equipment.
• Check hoses, tubes, and couplings daily. Replace worn or damaged parts
immediately.
4
WARNING
WARNING WARNING
EXPLOSION HAZARD EXPLOSION HAZARD HAZARD
immediately if static sparking occurs or you feel a shock. Do not use
immediately
CONDITIONS FOR FOR SAFE SAFE USE
CONDITIONS FOR SAFE
EQUIPMENT HAZARD EQUIPMENT HAZARD HAZARD
Pressure Pressure Relief Relief Procedure Relief Procedure when you stop spraying/dispensing and before Procedure
Grounding instructions. Grounding
USE
USE
work area work area can ignite or explode. area
3A4032D