Basic Configuration; Register Phone 1 (Ph1) - Master User - QTech SMS Lite User Manual

Basic Configuration

To operate the SMS Lite, the device must have a mobile number registered as 'Phone 1' referred to as
Ph1. You must register this number before you can configure any of the inputs or outputs.
The SMS Lite can have up to 4 phone numbers registered.
We recommend you follow these quick functional tests before performing advanced configuration.
This will help prove the SIM card, cellular network connection, device functionality and simplify
potential troubleshooting.
Register Phone 1 (Ph1) – Master User
Use this procedure to program the master user.
1. Locate the PIN (Personal Identification Number) printed inside your SMS Lite case.
The PIN in this example is 12345.
2. Compose text message to the SMS Lite mobile number in the following format:
#[PIN][space]Ph1:number=0123456789[dot] (e.g. #12345 Ph1:number=027987654.)
3. A confirmation text will be sent to you acknowledging a configuration change.
A setting can be overridden by sending a new configuration message. A configured input, output, or phone number
can also be cleared by sending a configuration message with a blank value:
SMS Lite 4G– User Guide
SMS Lite
#12345 ph1:number=027987654
You have changed the
configuration of the SMS
Lite.
"OUTPUTS",
"PHONES" to view the
configuration.
Each configuration command must be finished with a full stop (.)
The PIN is used each time a configuration change is made
#[PIN][space]Ph2:number=.
© 2022 QTech Data Systems Ltd
SMS Lite
.
Send "INPUTS",
or
8