■ Exercise caution to avoid slipping or falling. IMPORTANT! ■ Keep water away from all electrical devices It is essential that you read the instructions to reduce the risk of electrocution or electric in this manual before assembling, operating, shock. and maintaining the product.
● before clearing a blockage ■ Do not mix battery packs of different types or levels of use. ● before checking, cleaning, or working on the product ■ Use only battery packs intended specifically ● before changing accessories for the product. Use of any other battery packs may result in a risk of fire, electric ●...
These substances could result in serious ■ Do not overfill the product with food and injury or illness to the operator or bystanders. drinks. The cooling performance of the product may be reduced, causing spoilage. ■ Do not use electrical appliances inside the food storage compartments of the product ■...
prevent injury to persons or damage to the Function Description product. Turns the product on or Power button TRANSPORTING LITHIUM BATTERIES off. Transport the battery in accordance with local Toggles between fast Cooling mode and national provisions and regulations. cooling or energy saving. Follow all special requirements on packaging Temperature Adjusts the cooling or...
■ The insulation foam contains flammable Do not dispose of waste gases. Dispose of the product according batteries, waste electrical to local regulations. Avoid damaging the and electronic equipment as cooling unit, especially the heat exchanger. unsorted municipal waste. Waste batteries and waste electrical ■...
Page 7
R18FRF10 Pull handle Battery door Control panel Battery door handle Bottle opener Cooler door Cooler door handle Wheels Operator's manual 12/24/240 V adaptor input 240 V AC adaptor 12/24 V adaptor Charger Battery pack R18FRF142 Know your product...
Page 8
Unlock and open the battery door. Insert the battery pack until the latches click into place. Close the battery door. Make sure that the battery door latch clicks into place. Press the power button to turn on the Unlock and open the cooler door. Place food or beverages inside the product.
Page 9
Insert the 240 V AC adaptor into the adaptor input. Connect the plug to a power Insert the 12/24 V adaptor into the outlet. adaptor input. Connect to a 12/24 V socket. Close the cooler door. Make sure that NOTE: Once the product is on, it can After using the product, press the power the cooler door latch clicks into place.
Page 10
Operating the p.11 product Moving the product p.13 Cleaning and p.14 storing the product...
Page 11
OPERATING THE PRODUCT 1. Unlock and open the battery door. Insert the battery pack until the latches click into place. 2. Close the battery door. Make sure that the battery door latch clicks into place. NOTE: To operate the product using AC supply, insert the 240 V AC adaptor into the adaptor input and connect the plug to a power outlet.
Page 12
NOTE: The bottle opener on the product can be used to open bottles. 5. Close the cooler door. Make sure that the cooler door latch clicks into place. 6. Press the temperature control button to adjust the temperature inside the cooler compartment.
Page 13
MOVING THE PRODUCT 1. Press the power button to turn off the product. 2. Hold the pull handle. 3. LIft the product using the pull handle. 4. Move the product forward or backward. NOTE: There are sensors in the product that prevent it from damage if it is lifted while still turned on.
Page 14
CLEANING STORING PRODUCT 1. Press the power button to turn off the product. 2. Unlock and open the battery door. NOTE: Make sure to remove the food or beverage stored in the cooler compartment. 3. Press the latches on the battery pack to remove it from the product.
Page 15
4. Clean and remove dirt or debris from the product before storing. 5. Store the product in a cool, dry, and well-ventilated place that is inaccessible to children. Keep the product away from corrosive agents, such as garden chemicals and de-icing salts. Do not store the product outdoors.
Page 16
RB18L15, RB18L15A, RB1815C, RB18L20, RB18L20A, RB1820C, RB18L25, RB18L25A, RB1825C, RB18L26, RB18L30, RB18L30A, RB18L40, RB18L40A, RB1840C, RB1840X, RB18L40, RB18L40A, RB18L50, RB18L50A, RB1850C, RB1850X, RB18L60, RB18L60A, RB1860X, RB18L90, RB18L90A NOTE: Visit your local special orders desk or contact RYOBI customer service for replacement parts.
TROUBLESHOOTING If these solutions do not solve the problem, contact an authorised service centre. Problem Possible cause Solution The power button has not been pressed. Press the power button. The adaptor is not connected to the adaptor Insert the adaptor to the adaptor input and the power outlet properly. input or power outlet properly.
Page 20
Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand RYOBI is a trade mark of Ryobi Limited, and is used under license. 099503003048-01...