Advertisement
5 X-MAXX
Install the front LED light bar on
the front bumper using the two
included 3x8mm cap screws.
Plug the connector into
the high-voltage power
amplifier port A (white).
3x8mm
FRONT
8 X-MAXX
Rear LED
Light Bar
3x10mm
BCS
10 X-MAXX
Use the supplied zip ties to secure all wiring to the chassis.
Front LED Light
Front LED Light
CS
Attach the rear LED
light bar to the mount
3x10mm
using the two included
BCS
3x10mm button-head
cap screws. Plug the
connectors (red and
blue) into the long #7882
extension harness.
Bar Wiring
Bar Wiring
High-Voltage
High-Voltage
Power Amplifier
Power Amplifier
Wiring
Wiring
6 X-MAXX
3x8mm
CS
3x10mm
Rear LED Light
Install the rear LED light bar mount
on the truck body using the two
included 3x10mm flat-head screws.
9 X-MAXX
Plug the short #7882 extension harness into
the high-voltage power amplifier ports (red
connector to C, blue connector to D).
Plug the other end (large black connector)
into the long #7882 extension harness.
Rear LED Light Bar (tail lights) (red)
Rear LED Light Bar (reverse lights) (blue)
From Long Extension Harness /
Rear LED Light Bar on Body
7 X-MAXX
3x10mm
FCS
FCS
Bar Mount
Route the connectors from the rear
light bar through the larger reamed
hole to the inside of the truck body.
Front LED Light Bar (white)
Not used (yellow)
X-Maxx Wiring Diagram
Rear LED
Light Bar
Advertisement
