Chapter 3
3 11 System
3 11 1 LED Control
The LED of the extender indicates its activities and status. You can enable the
Night Mode feature to specify a time period during which the LED is off.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the password you set for the extender.
2. Go to
System
>
LED Contol
3. Enable
Night
Mode. Specify the LED off time, and the LED will be off during
this period every day.
3 11 2 Set Up System Time
System time is the time displayed while the extender is running. The system
time you configure here will be used for other time-based functions like Parental
Controls, Wi-Fi Schedules. You can manually set how to get the system time.
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log
in with the username and password you set for the extender.
2. Go to
System
>
Time Settings
page. Toggle On LED Status.
page.
25