Addenda Timeout; Ean/Jan-8 Addenda Separator; Msi; Msi On/Off - Honeywell HH1800 User Manual

Addenda Timeout

You can set a time during which the scanner looks for an addenda. If an addenda is not found
within this time period, the data can be either transmitted or discarded, based on the setting
you are using for
timeout by scanning the barcode below, then setting the timeout (from 0-120 milliseconds)
by scanning digits from the
Save. Default = 120.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.

EAN/JAN-8 Addenda Separator

When this feature is On, there is a space between the data from the barcode and the data
from the addenda. When turned Off, there is no space. Default = On.

MSI

MSI On/Off

HH1800 User Guide
EAN/JAN-8 Addenda
Programming Chart,
* On
<Default All MSI Settings>
On
Required. Set the length (in milliseconds) for this
beginning on page 211 of this manual, then
Addenda Timeout
* Not Required
Off
117