Table of Contents
Advertisement
14
www.aeg.com
8. DIAL AND BUTTONS
8.1 On/Off
Pressing this button for a few seconds
allows to activate or deactivate the
appliance. Two different tunes sound
while switching the appliance on or off.
As the Stand-by function automatically
deactivates the appliance to decrease
the energy consumption in a few cases,
you may need to activate the appliance
again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
Delay start indicator.
Drum clean indicator. Refer to the 'Cleaning the drum' section in the
'Care and cleaning' paragraph for more details.
The Temperature area:
Temperature indicator
Cold water indicator
Extra silent indicator.
Rinse hold indicator.
The spin area:
Spin speed indicator
No Spin indicator. Spin phase is off.
Pre-wash indicator.
Stain indicator.
Child safety lock indicator.
8.2 Introduction
The options/functions are
not selectable with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set the incompatible
options/functions together.
Make sure the screen and
touch buttons are always
clean and dry.
8.3 Temp.
When you select a washing programme,
the appliance automatically proposes a
default temperature.
Touch this button repeatedly until the
desired temperature value appears on
the display.
Advertisement
Table of Contents
