Display tunnel view
This function displays a tunnel view while traveling
through a tunnel. Proceed as follows to enable/dis-
able the function:
1. Press
Nav
.
HOME
2. Select menu item Settings.
3. Select menu item Navigation View.
4. Activate or deactivate checkbox Tunnel View
.
Show parking near destination
The Porsche Classic Communication Management
Plus uses this function to show parking near the
destination. Proceed as follows to enable/disable the
function:
1. Press
Nav
.
HOME
2. Select menu item Settings.
3. Select menu item Navigation View.
4. Activate or deactivate checkbox Offer Parking
Around Destination
.
Offer detour suggestions
The Porsche Classic Communication Management
Plus uses this function to show points of interest
near the freeway exit or avoidable route sections (e.g
toll roads) when you leave the calculated freeway
route. Proceed as follows to enable/disable the
function:
1. Press
Nav
.
HOME
2. Select menu item Settings.
3. Select menu item Navigation View.
4. Enable or disable checkbox Offer Hints Upon
Detour
.
Map view and direction
Proceed as follows to set the map view and direction:
1. Press
Nav
.
HOME
2. Press 3D, 2D or
.
• 3D map in travel direction: The map display is
slightly inclined and rotates in travel direction.
• 2D map in travel direction:
The map display shows the birds-eye perspective
and rotates in travel direction.
• 2D map in northerly direction: The map view
shows the birds-eye perspective. The map does
not rotate in travel direction. North is always on
top.
Navigation settings
Set language of user interface
Information
The menu language for navigation is controlled
centrally by the global settings menu of the Porsche
Classic Communication Management Plus. Naviga-
tion is restarted after the menu language is changed.
Set language for voice output
Proceed as follows to change the language of the
voice output:
1. Press
Nav
.
HOME
2. Select menu item Settings.
3. Select menu item Regional.
4. Select menu item Voice Language.
5. Select the desired language and speaker.
Set units and formats
Proceed as follows to change the units used for
navigation:
1. Press
Nav
.
HOME
2. Select menu item Settings.
3. Select menu item Regional.
4. Select menu item Units and Formats.
27