Table of Contents
Advertisement
6
Auto Tracking
6. Click the Draw icon
• Preset: Select the preset that you have created for your PTZ camera. If you have not yet
created one, see 5.2.1 Presets, page 16 for full instructions, otherwise auto tracking will
not work.
• Name: Set a custom name for the rule.
• Draw Rule: To draw, click around the area, then right-click to close the defined area. For
most accurate results, set an area where objects of interest will move within the defined
area as well as into/out of.
• Action: Check Appear to detect if an object of interest appears in the defined area.
Check Cross to detect if an object of interest enters or exits the defined area. Check both
to enable each type of action.
• Direction: Determine which direction an object needs to travel in order to trigger auto
tracking. You can select Enter for movement entering the defined area, or Leave for
movement exiting the defined area, or Both for both types of directions.
• Target: Enable the Target Filter. Then check the detection targets Person and/or
Vehicle.
• Click OK when finished.
#LX400116; r. 4.0/60127/60127; en-US
and customize the active area for auto tracking:
21
Advertisement
Table of Contents
