Table of Contents
Advertisement
5
Controlling the PTZ camera with the N883 Series NVR
5.2 Advanced PTZ Controls
Advanced PTZ controls can be used to save camera positions and cycle through various posi-
tions, and automate camera actions.
To open advanced PTZ controls:
• Click the arrow in the PTZ control window to open advanced controls.
Advanced PTZ controls overview:
1. No.: Enter the ID number for a preset, tour, or pattern you want to activate.
2. Preset: Move the camera to the preset number specified in the No. field. For instructions on
setting up preset locations, see 5.2.1 Presets, page 16.
3. AutoPan: Set the camera to rotate 180° back and forth.
4. Tour: Perform the tour number specified in the No. field. For instructions on creating a tour,
see 5.2.2 Tours, page 17.
5. Flip: Rotate the camera 180° from its current position.
6. Reset: Move the camera to the home position.
7. Pattern: Perform the pattern number specified in the No. field. For instructions on creating
a pattern, see 5.2.3 Patterns, page 17.
8. Configuration: Click to open the configuration menu, where you can configure presets,
tours, patterns and autoscans.
9. AutoScan: Move the camera between a predetermined left and right point. For instructions
on creating an autoscan, see 5.2.4 AutoScan, page 17.
10. OSD Menu: Click to open the camera's OSD menu. This may not be supported on all cam-
era models.
11. Auxiliary Settings: Not supported.
5.2.1 Presets
Presets will save a camera position for quick retrieval.
To add preset locations:
1. From the Live View display of your PTZ camera, right-click to open the Quick Menu, then
click Pan/Tilt/Zoom.
2. The PTZ controls open. Click
3. Click the Preset tab.
4. Enter the number of the preset you want to create under Preset.
5. Move the camera to the desired position and click Set.
#LX400116; r. 4.0/60127/60127; en-US
to open advanced PTZ controls, then click
.
16
Advertisement
Table of Contents
