MSI CX700 User Manual page 80

4-9
The Password Check item is used to specify the type of BIOS password
protection that is implemented. Settings are described below:
The password is required only when users try to access to
Setup
BIOS SETUP UTILITY.
The password is required every time when the Notebook is
Always powered on or when users try to access to BIOS SETUP
UTILITY.
To clear a set Supervisor Password/ User Password, just press [Enter]
under Change Supervisor Password/ Change User Password field
when you are prompted to enter the password. Please note that when
Supervisor Password has been cleared, User Password will be cleared as
well. A message box will pop up confirming password will be disabled.
Once the password is disabled, the system will boot and user can enter
setup without entering password.