Table of Contents
Advertisement
Chapter 4 - BIOS Setup
4.6 Integrated Peripherals
USB Controller
This setting is used to enable/disable the onboard USB host controller. Setting options:
[Disabled], [Enabled].
USB Device Legacy Support
Set to [Enabled] if you need to use any USB 1.1/2.0 device in the operating system
that does not support or have any USB 1.1/2.0 driver installed, such as DOS. Set to
[Disabled] only if you want to use any USB device other than the USB mouse. Setting
options: [Disabled], [Enabled], [Auto].
Onboard LAN Controller
The item enables or disables the onboard LAN controller. Setting options: [Enabled],
[Disabled].
Onboard LAN Option ROM
The item enables or disables the initialization of the onboard LAN Boot ROMs during
bootup. Selecting [Disabled] will speed up the boot process. Setting options: [Enabled],
[Disabled].
OnBoard IEEE1394 Controller (Optional)
This setting is used to enable/disable the onboard IEEE 1394 controller. Setting
options: [Enabled], [Disabled].
Onboard Audio Controller
This item is used to enable or disable the onboard Azalia (Audio Codec) controller.
4-11
Advertisement
Table of Contents
