Download Print this page
Yale AC-OPIR Manual
Yale AC-OPIR Manual

Yale AC-OPIR Manual

Outdoor motion detector

Advertisement

Quick Links

Outdoor Motion Detector Manual
AC-OPIR
The AC-OPIR, a battery operated Outdoor Motion Detector,
allows economical and effortless outdoor installation while
providing exceptional detection capabilities.
The built-in sensor with detection sensitivity eliminates the
chance of false alarms caused by small animals or other outdoor
disturbances.
The anti-masking feature allows for detection of attempts to
blind the detector by placing objects in its field of view.
In addition, the adjustable Detection Range gives an effective
zoning solution for every installation environment, providing
peace of mind whilst protecting your premises.

Advertisement

loading

Summary of Contents for Yale AC-OPIR

  • Page 1 Outdoor Motion Detector Manual AC-OPIR The AC-OPIR, a battery operated Outdoor Motion Detector, allows economical and effortless outdoor installation while providing exceptional detection capabilities. The built-in sensor with detection sensitivity eliminates the chance of false alarms caused by small animals or other outdoor disturbances.
  • Page 2: Identifying The Parts

    10. Protective Shield 6. Tamper Switch The protective shield protects the Digital Proximity Detector from rain. AC-OPIR is protected by the tamper switch against any   In Normal operation mode, the LED Indicator remains off except: unauthorised removal from the mounting plate or mounting When the Motion Sensor is in low battery condition, each time it transmits a detected movement, the LED will flash for ...
  • Page 3 9. Breakaway Area The Breakaway Area has 6 knockouts (2 for surface mounting and 4 for corner mounting) where plastic is thinner for screw mounting. When the Detector is forcibly removed from mounting location, the Break Away area will detach and activate the tamper alarm.
  • Page 4 Sync hub along with regular signal transmissions for the Sync hub to display the status accordingly. To Change Battery: Step 1: Navigate the Sync hub into Programming mode using the Yale Home app Step 2: Remove the Outdoor Motion Detector from mounting position and unscrew to open top cover.
  • Page 5 (blocking) attempt by an intruder. • When a masking event is detected, and the masking condition lasts for 2 minutes, AC-OPIR will send a tamper open signal to the Sync hub to notify user of the condition.
  • Page 6: Tamper Protection

    AC-OPIR for it to operate with new Dip Switch Settings. Tamper Protection • AC-OPIR is protected by a tamper switch which is compressed when it is hooked onto the mounting bracket. • Whenever the Outdoor Motion Detector is removed from the mounting plate, the tamper switch will be activated.
  • Page 7 LED dims and the Outdoor Motion Detector is ready to operate. • Put the Sync hub into learning mode using the Yale Home app. Please refer to Sync hub manual for details. • Press the Test button once. The LED indicator will flash for three times.
  • Page 8 After Outdoor Motion Detector is mounted, if the Yale Home app displays the Tamper fault status for the device, please make sure the anti-masking detector is not obstructed by any object and wait for two minutes to see if the Tamper Open status is cleared.
  • Page 9 Installation Recommendations It is recommended to install the Outdoor Motion Detector in the following locations: • 2M (measured from bottom of the Outdoor Motion Detector) above ground level for best performance. • The operating temperature is -10° to 45°C. e Control Panel displays the Tamper fault status for the device, please make sure the •...
  • Page 10 Please install the Outdoor Motion Detector straight up. Do not tilt it. Do not install the motion sensor where objects moved by wind such as trees and laundry, which may block the  Do not install the motion sensor where objects moved by wind such as trees and laundry, which may block the Do not install the motion sensor where objects moved by wind such as trees and laundry, which may block the ...
  • Page 11 If the object is idle (i.e. not moving), the Outdoor Motion Detector is unable to detect it. The Outdoor Motion Detector has a directional characteristic and is most effective at detecting intruder moving across field of detection. It is less sensitive for detecting motion directly towards the Outdoor Motion Detector.
  • Page 12 www.yalehome.co.uk Security & Risk Communications Limited, Parkway Business Centre, Ballymount, Dublin, Ireland, 24 Trusted every day ASSA ABLOY Opening Solutions UK & Ireland School Street, Willenhall West Midlands, WV13 3PW UK Version 1A...