Table of Contents
Advertisement
Note: Do not disconnect the battery of the
disabled vehicle as this could damage the
vehicle electrical system.
Connecting the Jumper Cables
A
C
E102925
A
Flat battery vehicle.
B
Booster battery vehicle.
C
Positive connection cable.
D
Negative connection cable.
WARNING
Do not let the vehicles come into
contact when using booster cables.
1.
Position the vehicles in a suitable
arrangement to connect the booster
cables.
Ranger (TKE) Vehicles Built From: 02-05-2016 Vehicles Built Up To: 04-09-2016, EB3B-19G219-AKC enGBR, First Printing
Roadside Emergencies
D
B
196
2. Switch off the engine and any electrical
equipment.
3. Connect the positive (+) terminal of
vehicle B with the positive (+) terminal
of vehicle A (cable C).
E205764
WARNINGS
Do not connect directly to the
negative (–) terminal of the flat
battery.
Make sure that the cables are clear
of any moving parts and fuel delivery
system parts.
4. Connect the negative (-) terminal of
vehicle B to the ground connection of
vehicle A (cable D).
To Start the Engine
WARNING
Do not switch the headlamps on
when disconnecting the cables. The
peak voltage could blow the bulbs.
1.
Run the engine of vehicle B at a
moderately high speed.
2. Start the engine of vehicle A.
Advertisement
Table of Contents
Troubleshooting
