Transparency; Units Of Measure - Lowrance X67C Installation And Operation Instructions Manual

Surface clutter
In the illustration at left, Surface Clarity is turned off.
The right view shows Surface Clarity set at High.

Transparency

Use the transparency menu to adjust the transparency of menu win-
dows. A high transparency allows you to continue monitoring the sonar
chart while adjusting feature settings, though the text of the menus
may fade until it is unreadable. A low transparency will usually make
menu text easier to read, at the cost of watching your sonar returns.
Experiment with this feature until you find the right level of transpar-
ency for your eyes.
Main Menu with Transparency command selected.
To adjust Menu Transparency level:
Press | |↓ to | . The slider bar
MENU MENU T ENT T
RANSPARENCY RANSPARENCY
appears. Press ↑ or ↓ to move the bar. The lower end of the scale makes
the menus opaque; the upper end is maximum transparency.

Units of Measure

This menu sets the speed and distance (statute or nautical miles, me-
ters), depth (feet, fathoms, or meters) and temperature (degrees Fahr-
enheit or Celsius). To change the units:
64