Table of Contents
Advertisement
h
Touch
to cancel the current character patterns.
i
Select the character patterns for "DEF", and then
touch
and
.
j
Touch
.
k
Touch
, and then touch
The needle is positioned in the lower-left corner of
the pattern. The embroidery frame moves so that the
needle is positioned correctly.
l
Use
to align the needle with the end of the
embroidering for the previous pattern.
m
Touch
.
n
Lower the embroidery foot and press the "Start/Stop"
button to begin embroidering the remaining character
patterns.
Note
• Multi-position (extra large) embroidery frame
(Sold separately with some models)
By changing the attaching position of the multi-
position (extra large) embroidery frame using any of
the three positions (1, 2 and 3), 30 cm × 13 cm
(12 inches × 5 inches) area can be embroidered
without hooping the fabric again. The embroidery
field with each section is 18 cm × 13 cm (7 inches
× 5 inches).
Use when embroidering connected or combined
characters or patterns, or large patterns.
a
b
c
1 Top installation position
2 Middle installation position
3 Bottom installation position
4 Embroidery field (when installed at position 1)
5 Embroidery field (when installed at position 2)
6 Embroidery field (when installed at position 3)
Thread color sorting
This function allows you to embroider a combined pattern
while replacing the thread spool a minimal number of times.
Before starting to embroider, touch
settings screen to rearrange the embroidery order and sort it
by thread colors.
.
a
The embroidery color order is rearranged and sorted by thread
colors.
Touch
color sorting and embroider with the original embroidery
color order.
e
f
Editing Patterns (Embroidery Settings Screen)
Touch
.
*
Touch
again to check the sorted thread colors.
again in the embroidery settings screen to cancel
Note
• This function does not work on overlapping
designs.
in the embroidery
4
99
Advertisement
Table of Contents
