Panasonic FP7 Series User Manual page 14

1.2 Overview of Functions
Item
Trace stop condition
File format
(Note 1) The trace operation is executed when the condition is met at the end of scan.
(Note 2) When selecting "Bit" for the trace stop condition, logging data of the specified number of samples is
possible after the condition is met.
(Note 3) Unlike the file determination condition of the logging function, logging of data for the specified number
of samples starts when the bit device changes from OFF to ON.
■
Image of trace function
● The trace function can also be activated only with the internal memory of the CPU unit.
● SD memory cards are used only for recording trace data in recording media.
1-6
Specifications
Instruction: Executes an instruction with an arbitrary
condition and starts trace.
(Note 2)(Note 3)
Bit device ON
Buffer full
Data is saved in csv format.
Remarks
Arbitrary comments can be
given.
The upper limit of the
capacity on the file system is
4 GB.
WUME-FP7CPULOG-04