Table of Contents
Advertisement
Adjusting the volume of alarms and
buzzers /
You can adjust the volume of alarms
and buzzers (e.g. in the event of a door
alarm or fault message). You can also
switch off the alarms and buzzers if
they disturb you.
In Settings mode , use the or
sensor control to scroll to the
symbol.
Touch OK.
Use the and sensor controls to
select the volume you want for
alarms and buzzers.
Touch OK.
appears in the display when the
alarms and buzzers are switched off.
Adjusting the display brightness
You can adjust the display brightness to
suit the lighting conditions in the room.
In Settings mode , use the or
sensor control to scroll to the
symbol.
Touch OK.
Use the and sensor controls to
select the display brightness you
want.
Touch OK.
Selecting further settings
Switching off demo mode
Demo mode allows the refrigeration
appliance to be presented by dealers
without the cooling system being
switched on. This setting is not needed
for domestic use.
If demo mode has been switched on
as a default setting, will show on the
display when the refrigeration appli-
ance is switched on.
Touch the OK sensor control on the
control panel.
Miele
will appear initially in the display,
followed by the start screen.
Touch OK.
In Settings mode , use the or
sensor control to scroll to the
symbol.
Touch OK.
After demo mode has been switched
off, the refrigeration appliance switches
off and must be switched on again.
47
Advertisement
Table of Contents
