Table of Contents
Advertisement
[ENGLISH]
Contents
1. Part Names
2. Introduction
3. Direct Button Operation
4. On-Screen Display Menu
1. Introduction
2. Menu Operation Buttons
3. Video / Audio Settings
4. Setup
5. Parental Control
5. Application
6. Using a PC
7. Appendix
8. Specifications
9. Trademarks
10. Dimensional Drawings
Ver. 1.0.0
>>
On-Screen Display Menu
<<
Video / Audio Settings
Tint
Adjusts the picture to your preference with the following picture settings.
Selected item
To adjust video settings by the default selections: Standard, Movie, Thru, PC, Dynamic,
Dynamic (Fixed) and User.
Picture mode
The different selections of Picture Mode will affect the option value of Backlight,
Brightness, Contrast, Saturation, Tint and Sharpness.
The Picture Size UI is only displayed when current source has signal.
Picture Size
To adjust screen size Auto / Normal / Zoom / Dot by Dot / 4:3 / 14:9 / 16:9
When current progress option is available, Press ENTER key to pop up this progress
Backlight
bar view.
To adjust the back light to brighten or darken: 0 ~ 100.
Adjust brightness of screen.
Brightness
Adjustment range: 0 (Darkest) - 100 (Brightest)
Adjust contrast of screen.
Contrast
Adjustment range: 0 (Lowest) – 100 (Highest)
Adjust saturation of screen.
Saturation
Adjustment range: 0 (Lowest) – 100 (Highest)
Adjust Tint of screen.
Tint
Adjustment range: -50 (Low) – 50 (High)
Adjust sharpness of screen.
Sharpness
Adjustment range: 0 (Weak) – 20 (Strong)
To adjust the color temperature: User, Cool, Standard and Warm.
Color
The different selection of color temperature will affect the option value of R Gain, G Gain
Temperature
and B Gain.
DNR is Digital Noise Reduction.
DNR
To adjust the level of reducing the appearance of digitizing error caused by the
compression: Medium, Strong, Auto, Off and Low.
Rest to Default
Reset setting value to default
en-US 24
Advertisement
Table of Contents
