Table of Contents
Advertisement
PAIRING MODE
The BTC-2X has two pairing modes: automatic and manual, which are set via a convenient slide switch on the bottom
of the BTC-2X.
Automatic Pairing
Automatic Pairing is the simplest method and is designed for use in most residential single-family homes or any envi-
ronment where it is not likely to have any neighbors or other people close enough to pair their phones or tablets to the
BTC-2X. When not connected to a phone or tablet, the BTC-2X will always be available to pair with any new device
within range that requests pairing.
Manual Pairing
Manual Pairing is designed for all applications when greater control over the Bluetooth connections is desired and
especially in environments where multiple homes are within Bluetooth range such as Multi-Dwelling Units (MDU's) like
condominiums, townhouses, apartments, etc.
When in manual pairing mode, the BTC-2X will only be able to pair with new phones or tablets when not connected to
a device and someone:
a) Presses the "Pair" button on the rear panel of the BTC-2X; - OR -
b) Activates the "Remote Pair" contact closure on the rear panel of the BTC-2X. The Remote Pair is a unique
optional feature that allows an installation professional to wire a simple push button control or to use an
automated contact closure from a smart home control system. This allows the BTC-2X to be hidden com-
pletely from sight and still be able to be put into pairing mode easily when desired.
Russound BTC-2X Installation Guide
OPERATION
5
Advertisement
Table of Contents
