Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CyberPower PFC SINEWAVE Series
Summary of Contents for CyberPower PFC SINEWAVE Series
-
Page 2: Product Registration
PRODUCT REGISTRATION Thank you for purchasing a CyberPower product. This UPS is designed to provide unsurpassed power protection, operation, and performance during the lifetime of the product. Please take a few minutes to register your product at: www.CyberPowerSystems.com/registration. Registration certifies your product’s warranty, confirms your ownership in the event of a product loss or theft, and entitles you to free technical support. -
Page 3: Installing Your Ups System
80% of the unit’s capacity. SUPPORTS ACTIVE PFC POWER SUPPLIES HARDWARE INSTALLATION GUIDE This CyberPower UPS system supports High 1. Your new UPS may be used immediately Efficiency power supplies with Active Power upon receipt. However, after receiving a Factor Correction (Active PFC). -
Page 5: Basic Operation
BASIC OPERATION 1. Power Switch 9. Full-Time Surge Protection Outlets Used as the master on/off switch for The unit has five surge suppression outlets. equipment connected to the battery power 10. Circuit Breaker supplied outlets. Located on the back of the UPS, the circuit 2. -
Page 8: Definitions For Illuminated Lcd Indicators
The UPS will not turn on. Contact CyberPower Systems The battery is worn out. about replacement batteries at: cyberpowersystems.com/support. Contact CyberPower Systems at: Mechanical problem. cyberpowersystems.com/support. Connect the USB / serial cable to the UPS unit and an open USB The USB cable is not connected. -
Page 9: Technical Specifications
14.2 in., 3.9 in., 10.4 in. (361 mm, 99mm, 264 mm) Net Weight 24.7 lbs / 11.2 kg Battery Type CyberPower / RB1280X2B Typical Battery Recharge Time 8 hours from total discharge under 100% load Typical Battery Life 3 to 6 years, depending on number of discharge/recharge cycles...