Determining The Driver And Client Utility Versions; Uninstalling The Current Driver And Client Utilities - Cisco Aironet 340 Series Installation And Configuration Manual

Upgrading the Client Adapter Software

Determining the Driver and Client Utility Versions

Follow the instructions in this section to determine if you need to upgrade the client adapter's driver or
client utilities.
Step 1 To determine the version of the driver that your client adapter is currently using, double-click the Cisco
ACU icon or select Start > Programs > Cisco > Aironet Client Utility. The current version of your
adapter's driver is shown on the ACU screen, provided the client adapter is installed in the Windows CE
device and is operational.
To determine the version of a client utility that your client adapter is using, open the utility and click the
Step 2
About button at the bottom of the screen. The About screen displays the current version of the utility.
To determine the latest driver and client utility versions available on Cisco.com, follow the steps below:
Step 3
a.
b.
c.
d.
Step 4 If the driver or client utility version available from Cisco.com is greater than the version currently being
used by your client adapter, follow the instructions in the
Utilities"
"Loading a New Driver and Client Utilities" section on page 7-7
utilities.

Uninstalling the Current Driver and Client Utilities

Cisco recommends that you uninstall the existing driver and client utilities for your client adapter before
upgrading to more recent versions. This section provides instructions for uninstalling your client
adapter's current driver and client utilities. The instructions vary depending on your client adapter's
current driver version.
Uninstalling Driver Version 1.4 for Windows CE 2.11
Terminate any Cisco Aironet applications running on the Windows CE device and eject the client
Step 1
adapter.
Select Start > Programs > Cisco > Cisco Aironet Uninstall. The Cisco Aironet Uninstall screen
Step 2
appears.
Select the Uninstall Cisco Aironet Wireless LAN Adapter checkbox.
Step 3
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
7-6
Use your computer's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Locate the section for client adapter drivers and utilities.
Click the link for Windows CE 2.11 or 3.0, depending on which version of Windows CE your device
is running.
Note If you are not sure which version of Windows CE your device is running, refer to the
"Determining the Windows CE Version" section on page 3-2
Look at the release numbers of the driver and client utilities in the description below the filename.
These are the latest available versions on Cisco.com.
section below to remove the current driver and client utilities and the instructions in the
Chapter 7
for instructions.
"Uninstalling the Current Driver and Client
to install the new driver and client
Routine Procedures
OL-1375-02