Mercedes-Benz E-Class Coupe 2022 Owner's Manual page 373

370 Technical data
370
Engine oils for one-time lling only in exceptional
cases:
P P e e tr trol engines: ol engines:
R
MB-Freigabe or MB-Approval 229.31
-
ACEA C3
Diesel engines: Diesel engines:
R
E 400 d 4MATIC: E 400 d 4MA TIC: MB-Freigabe or MB-
-
Approval 229.51 ACEA C3
All ot All other models: her models: ACEA C3
-
The following values refer to an oil change, includ-
ing the oil lter.
Engine oil lling Engine oil lling capacity capacity
Model Model
E 200 4MATIC
E 220 d
E 220 d 4MATIC
E 300 d 4MATIC
E 400 d 4MATIC
Model Model
E 450 4MATIC
All other models
N N o o t t es on br es on brak ake e uid
Observe the notes on operating uids
( page 363).
/
& W W ARNING
ARNING Risk of an accident due to
vapour pockets forming in the brake sys-
tem
The brake uid constantly absorbs moisture
Capacity Capacity
from the air. This lowers the boiling point of
the brake uid. If the boiling point is too low,
6.0 litres
vapour pockets may form in the brake system
6.3 litres when the brakes are applied hard.
This impairs the braking e ect.
Have the brake uid renewed at the
#
6.5 litres
speci ed intervals.
7.5 litres
Have the brake uid regularly replaced at a quali-
ed specialist workshop.
Capacity Capacity
8.5 litres
6.6 litres
uid
Only use a brake uid approved by Mercedes-
Benz according to MB-Freigabe or MB-Approval
331.0.
Coolant Coolant
N N o o t t es on coolant es on coolant
Observe the notes on operating uids
( page 363).
/
& W W ARNING
ARNING Risk of re‑ and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite.
Allow the engine to cool down before
#
you top up the antifreeze.
Make sure that no antifreeze spills out
#
next to the ller opening.
Thoroughly clean the antifreeze from
#
component parts before starting the
vehicle.