Download Print this page

Audi R8 Spyder Technical Service Bulletin page 3

72 seat fore-and-after adjustment incorrect

Advertisement

Technical Service Bulletin
In some cases, the seats cannot be
adjusted backward far enough (Figure 2).
Production Solution
Improved software in the seat control modules J136, (address word 0036) and J521, (address word 0006).
Service
SVM Update Instructions
1. Follow all instructions in TSB 2011732:
© 2022 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to
other sites, without the prior expressed written permission of the publisher.
Figure 2. Seat not moving backward far enough.
00 Software Version Management (SVM), operating instructions.
Page 3 of 6

Advertisement

loading