Download Print this page

Technical Background - Audi R8 Spyder Technical Service Bulletin

72 seat fore-and-after adjustment incorrect

Advertisement

Technical Service Bulletin
• The seat cannot be adjusted backward far enough.

Technical Background

On R8 Spyders with sport seats and fully
electric seats, the seats can be adjusted
to positions that allow for mechanical
interference between the seat backrest
panels and the rear panel trim panel
and/or windscreen during normal
operation. This interference can result in
damaged trim panels and/or windscreen
(Figure 1).
© 2022 Audi of America, Inc.
All rights reserved. Information contained in this document is based on the latest information available at the time of printing and is subject to the copyright and other intellectual property
rights of Audi of America, Inc., its affiliated companies and its licensors. All rights are reserved to make changes at any time without notice. No part of this document may be reproduced,
stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, nor may these materials be modified or reposted to
other sites, without the prior expressed written permission of the publisher.
Figure 1. Damaged rear panel trim panel.
Page 2 of 6

Advertisement

loading