Installing 3Com Wireless Lan Manager; Using Wireless Lan Manager - 3Com 3CRWE62092B User Manual

Installing 3Com
Wireless LAN Manager
Using Wireless LAN
Manager
EXHIBIT 8: User Manual
If you are using Windows XP or 2000, click the Hardware tab and click Device
Manager.
5 Double-click Network Adapters. One entry appears: 3Com Wireless LAN PC Card.
6 Double-click the entry to display a description of the current status.
The device status should indicate "This device is working properly."
7 Close the windows you have opened until you return to the desktop.
NOTE: Wireless LAN Manager defaults to automatically connect to any wireless
network and no security. This default allows a basic connection to an access point.
After installation, consult with your network administrator and refer to 3Com's
Wireless LAN Manager's online help to change the service set identifier (SSID) and
security settings.
1 If you restarted your maching after installing the Wireless LAN PC Card and the
install program did not start automatically, click Start>Run and type d:\setup.exe
(where d: is your CD-ROM drive).
2 From the Installation CD, select Step 2: Install Software and follow the prompts,
removing the Installation CD and restarting your computer whenever you are
prompted.
If the 3Com icon was not placed in the system tray when you installed the
Wireless LAN PC Card, start the 3Com Launcher by selecting Start > Programs >
3Com Mobile > 3Com Launcher.
Refer to the 3Com Wireless LAN Manager help for detailed information about
how to use Wireless LAN Manager.
Page 6 of 16

Installing 3Com Wireless LAN Manager

7