3.2. Shutdown Operation
3.2.1. Automatically Stopping by Pressing STOP Switch Button
1
Press and hold the STOP switch for about two seconds.
All operations up to the unit power OFF are performed automatically.
Operating status
indicator lamps
Displays "Ready",
"Fault" and "Warning".
● The power is turned OFF by the STOP switch when ink is being ejected or stopped. (The main power
switch does not have to be turned off. Power consumption does not change even if the main power
switch remains ON.)
Main power switch
Turns the unit ON and OFF.
ON/STOP switch
Starts or stops the unit
with the main power on.
Chapter 3 Basic Operation
3-13