Figure 4-7: Wireless Security - Wpa Personal; Figure 4-8: Congratulations - Linksys WUSBF54G User Manual

Wireless-G USB Network Adapter with Wi-Fi Finder
WPA-Personal Needed for Connection
Encryption - Select the type of algorithm you want to use, TKIP or AES, from the Encryption drop-down
menu.
Passphrase - Enter a Passphrase, also called a pre-shared key, of 8-63 characters in the Passphrase field.
The passphrase must match the devices on your wireless network.
Then, click Connect and proceed to the Congratulations screen. To cancel the connection, click Cancel.
2. After the Adapter has been configured for the network, the Congratulations screen will appear. Click Connect
to Network to connect to your network.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to Chapter 5: Using the Wireless Network Monitor
Chapter 4: Setting up and Connecting the Wireless-G USB Network Adapter with Wi-Fi Finder
Setting Up the Adapter
Congratulations! Setup is complete.

Figure 4-7: Wireless Security - WPA Personal

Figure 4-8: Congratulations

12