Eeprom Copy Jig - Panasonic CT-30WX54J Service Manual

9 EEPROM copy jig

TOP PREVIOUS NEXT
This CTV has a feature that allows to clone or back-up main EEPROM data adjustments from a CTV
to other by connecting a jig to the CTV set. A jig part number TXFJIG02SER, is available through
Matsushita/Panasonic Services.
Preparation:
To connect this jig, remove the lower back cover as instructed on disassembly for service section on
this service manual and insert the jig into A15 connector located on the A-Board.
Procedure to copy data:
1. Enter to service mode and display service menu.
2. Select AREA DAC and then press ACTION button on remote to enter. Press VOL right/left to
select one of the following options then press ACTION:
Select ALL to copy all main EEPROM data
Select ADJ to copy only adjustment data.
Select FIX to copy only fix data
3. To copy data from main EEPROM to jig, select IN→EX DAC and press ACTION button on
remote.
4. To copy data from jig to main EEPROM, select EX→IN DAC and press ACTION button on
remote.
TOP PREVIOUS NEXT