Table of Contents
Advertisement
FEATURES CONTINUED
[For model : FV-0511VFL1 and FV-0511VFL1K]
Pick-A-Flow Feature:
This product comes with Pick-A-Flow speed options.
The Pick-A-Flow switch on the face of the product allows the option to
choose 50, 80 or 110 CFM. This product can run continously or intermittently,
depending upon the needs of the owner.
Air volume option (CFM)
50
80
[For model : FV-0511VFL1K only]
Adjustable color temperature Feature:
This product comes with an adjustable color temperature switch.
The adjustable color temperature switch on the LED unit allows
the option to choose 3000, 4000, or 5000 K, to match the room
lighting or the owner preference.
Lighting option (K)
3000
4000
The 3000 K LED setting produces a warm white light.
The 4000 K LED setting produces a cool white light.
The 5000 K LED setting produces a daylight color white light.
INSTALLATION (RETROFIT)
Remove the tape
placed on the damper
and adaptor before
installation.
Install Flex-Z Fast™ bracket
The Flex-Z Fast™ bracket position can be adjusted from 16" to 24" between joists.
1
Template
PAD
Drywall
Marker
Template
Draw the contour with a marker through marked line
1
Remove the existing fan and use housing masking
template to mark the ceiling opening and cut the
ceiling along the marked line.
2
Insert the Flex-Z Fast™ bracket into the opening
and extend.
6
English
Factory setting
110
80 CFM
Factory setting
5000
4000 K
Damper
Tape
Flex-Z Fast™ bracket
Adjustable color
temperature switch
WARNING
Adaptor
Disconnect power supply before installing
the unit.
Please wear gloves to protect hands
during the installation.
2
Flex-Z Fast™ bracket
3
Bend down 4 tabs and align bracket to the joist.
4
Install Flex-Z Fast™ bracket to joist using 2-preinstalled
tapping screws.
CFM
50 80 110
Pick-A-Flow
switch
Unit: inches (mm)
3
Bend down
4
2 Tapping screws
(ST4.2X20)
4 tabs
Hide quick links:
Advertisement
Table of Contents
