Using Mute; Do Not Disturb - Motorola 200IP-2P User Manual

Ip smart voip phone
Table of Contents

Advertisement

Transferred
to
idle
lines
or
other
numbers
without
talking to the transfer
recipient
(Blind transfer)
Blind transfer to the
held line

3.5.11 Using Mute

With Mute enabled, you can hear other parties on a call but they cannot hear you. You can use
mute in conjunction with the handset, speakerphone, or a headset。
Toggle Mute on
Toggle Mute off

3.5.12 Do Not Disturb

You can use the Do Not Disturb(DND) feature to block incoming calls on your phone with a busy
tone(Can also be set to their voice mail or other extension numbers, etc.).
Enable global DND
Enable DND on a
single line
Disable DND
Motorola
-or wait five seconds(default)then transfer the call
--1) Press TRANSFER button or XFER;
--2) Press Blind;
--3) Enter number;
--4) Press "#"(default)
-or press Send, then transfer the call;
-or wait five seconds(default)then transfer the call
--1) Press TRANSFER button or press XFER;
--2) Press the Line button of held line
Press C button, then the screen top and left will have a MUTE icon
Press C button again, then the button light off
--1) Press DND;
--2) All enabled line on the phone would changes to
the icon is
.
Press MENU button > "Function setting" > "DND" > (select line)
"Enable"
--Global DND enabled, press DND to disable global DND;
--Line DND enabled, press twice DND.
-or press MENU button > "Function setting" > "DND" >(select line)
"Disable"
status. and

Advertisement

Table of Contents
loading

Table of Contents