Using Hold And Recover (Switch Calling Line); Transferring Calls - Motorola 200IP-2P User Manual

Speakerphone
Hang up while using the
Headset
Hang up one call, but
preserve another call on
the other line

3.5.9 Using Hold and Recover (Switch Calling Line)

You can hold and resume calls. You can take a call in one line at anytime, and the other lines
would be hold. As a result of that, you can switch different calling line on our phone.Note:If the
phone isn't have the hold button, pls using the soft key.
If you want to...
Put a call on hold
Hold a line and switch to
another line
Resume a call on current
line
Release a call on different
line
NOTES
• Engaging the Hold feature typically generates music or a beeping tone.
• A held call is indicated by the Yellow-green and flashing Line button or Hold in the LCD.

3.5.10 Transferring Calls

Transfer redirects a connected call. The target is the number to which you want to transfer the
call.
Talk to the transfer
recipient before
transferring a call
(consult transfer)
Motorola
-or press Line button for the appropriate line,
-or press End
--Press Handset button, （Do not keep the headset mode) ,
-or press End (keep the headset mode)
--Press End,
-or refer to the above three methods
--Press HOLD button,
-or press soft key Hold
Press another Line button for the appropriate line
--Press Line button,
Select the line want to release hold, press the line, so recovery;
--1) Press TRANSFER button or press XFER;
--2) Enter number;
--3) press "#"（default) ,
-or press Send then transfer the call,
Then...