Steering Friction Adjusting Screw; Trim Angle Adjusting Rod; Tilt Support Bar - Yamaha F4 Owner's Manual

q
EMU00108
STEERING FRICTION ADJUSTING
SCREW(for Tiller control model)
A friction device provides resistance to
steering movement. This is adjustable for
operator preference.
screw/bolt is located on the swivel brack-
et.
EMU01296*
Adjustment
Resistance
Increased
Decreased
w
Do not over
screw/bolt. If there is too much resis-
tance, it may be difficult to steer, which
could result in an accident.
EMU01297

TRIM ANGLE ADJUSTING ROD

The position of the trim angle adjusting
rod determines the minimum trim angle
of the outboard motor in relation to the
transom.
EMU00156

TILT SUPPORT BAR

The tilt support bar 1 keeps the outboard
motor in the tilted up position.
2-7
An adjusting
Screw/Bolt
Turn clockwise
Turn counterclockwise
tighten the friction
GB