Table of Contents
Advertisement
Advanced Memory Settings
The settings above are synchronous to those under the same items on the Advanced Frequency Settings
menu.
Memory Timing Mode
Manual and Advanced Manual allows the Channel Interleaving, Rank Interleaving, and memory timing settings
When using a non-XMP memory module or
or
, the value is displayed according to the SPD data on the XMP memory.
Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory
Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail
to boot after you make changes on the memory timings. If this occurs, please reset the board to default values
Advanced Voltage Settings
This sub-menu allows you to set CPU, chipset and memory voltages.
PC Health Status
Enabled
Clears the record of previous chassis intrusion status and the
show "No" at next boot.
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
clear the chassis intrusion status record, set
the CMOS, and then restart your system.
CPU Vcore/DRAM Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
CPU/System Temperature
Displays current CPU/system temperature.
CPU/System Fan Speed
Displays current CPU/system fan speeds.
to Enabled, save the settings to
- 20 -
is set to Disabled, the value
is set to
Advertisement
Table of Contents
