Lap List; Roll Out Chart; Gear Ratio Chart - RadioLink RC8X Instruction Manual

Attention: If the timer start function selects the trigger as the trigger button and the throttle
trigger function has turned on, the throttle trigger function will be used first.

2.2.5 Lap list

Call lap list when checking the lap memory data (each lap time)
memorized by lap timer operation. This function is not available
currently, please pay attention to RadioLink official website
www.radiolink.com to get the latest firmware to update this
function.

2.2.6 Roll out chart

This function is designed for pan cars. The roll out chart can be calculated from input values
for the number of teeth of the spur gear and pinion gear, and the
tire diameter and displayed as a table.
Pinion: Tap the blue select box under Pinion to select the value
of the pinion gear, click "-" can decrease the value, and click "+"
can increase the value, 10 to 60 can be selected.
Spur: Tap the blue select box under Spur to select the value of
the teeth of spur gear, click "-" can decrease the value, and click
"+" can increase the value, 50 to 130 can be selected.
Diameter: Tap the blue select box under Diameter to select the
value of the tire diameter, click "-" can decrease the value, and
click "+" can increase the value, 40.0 to 100.0 can be selected.
Step: Tap the blue select box under Step to set the step of input numerical value of tire
diameter amount, click "-" can decrease the value, and click "+" can increase the value,
0.1mm to 1.0mm can be selected.

2.2.7 Gear ratio chart

The Gear Ratio Chart can be calculated from input values for the number of teeth of the spur
gear and pinion gear, and the second gear ratio, and displayed as
a table.
Pinion: Tap the blue select box under Pinion to select the value
of the pinion gear, click "-" can decrease the value, and click "+
can increase the value, 10 to 60 can be selected.
Spur: Tap the blue select box under Spur to select the value of
the teeth of spur gear, click "-" can decrease the value, and click
"+" can increase the value, 0.0 to 100.0 can be selected.
nd
2 gear ratio: Tap the blue select box under 2
select the value of the second gear ratio, click "-" can decrease
the value, and click "+" can increase the value, 50 to 130 can be
selected.
nd
gear ratio to
37
RadioLink Electronic Limited
www.radiolink.com