PRODUCT DATA
WRP400
Model:
Hardware
Features
Software Features
Voice Features
•
One 10/100 802.3/u (RJ-45) WAN Interface
•
Four 10/100 802.3/u (RJ-45) LAN Interfaces
•
Integrated 802.11b/g Wireless Access Point
•
Two FXS RJ-11 Interfaces
•
Reset Button / Restore Factory Defaults
•
LEDs – Power, Internet, Ethernet, Wireless, Phone(s), WPS
•
Power – External, 5V DC, 2A (full range switching power adapter)
•
Wi-Fi Protected Setup (WPS) Button
•
Static and Dynamic Routing (RIP 1, RIP2)
•
Multicast Pass-Through
•
Denial of Service (DoS) Prevention
•
Web Based Configuration
•
VPN Pass-Through with IPSec, L2TP and PPTP
•
Event Logging
•
DHCP Server
•
Access Control Lists
•
Universal Plug and Play (UPnP)
•
Password Protected Configuration or Management Sessions for Web Access
•
Remote Management (SIP SUBSCRIBE and NOTIFY message, use NOTIFY message to reset the
box remotely) and Remote Web Management
•
IGMP Multicast and IGMP Snooping (v1/v2/v3) Support
•
802.1p Prioritization QoS Support
•
DiffServ, ToS Classification
•
DMZ Hosting
•
WPA and WPA2
•
WMM (Wi-Fi Multimedia)
•
Dual SSID
•
Session Initiation Protocol (SIP v2, RFC3216)
•
Sending SIP Messages via UDP/TCP
•
G.711a, G.711u, G.729, G.726 Codec
•
G.711 Pass-Through
•
Echo Cancellation (G.167 and G.168)
•
Dynamic Jitter Buffer
•
Simple Traversal of UDP through NAT (STUN, RFC 3489)
•
Session Description Protocol (SDP, RFC 2327)
•
RTP/RTCP over UDP
•
Three-Way Conferencing
•
Remote Firmware Upgrade
•
Session Initiation Protocol (SIP v2)
•
DTMF Tone Detection and Generation
•
Voice Activity Detection (VAD)
•
Silence Suppression
•
Comfort Noise Generation (CNG)
•
Caller ID Generation and Detecting (FSK and DTMF)
•
Media Loopback
•
SIP TLS (Transport Layer Security)