Table of Contents
Advertisement
4. Select Internet Protocol
(TCP/IP) (as shown in
Figure 3-8) and click the
Properties button.
5. Select Obtain an IP
address
automatically
and verify that Obtain
DNS server address auto-
matically is selected (as
shown in Figure 3-9).
Then, click the OK button
and click the OK button on
the subsequent screens to
complete the PC's configu-
ration.
Repeat steps 1-5 for each PC on your network. When all of your PCs are
configured, proceed to Chapter 4: Configuring the Router.
16
Instant Wireless
Series
TM
Figure 3-8
Figure 3-9
Wireless Access Point Router with 4-Port Switch
Chapter 4: Configuring the Router
for Wireless
The Router is pre-configured to work with your AT&T Broadband connection.
This section will provide information to configure the wireless function of the
Router. Detailed description of the Router's Web-based Utility can be found in
the Chapter 5: Using the Router's Web-Based Utility.
1. Open your web browser, and enter 192.168.1.1 into the web browser's
Address field, as shown in Figure 4-1. Then, press the Enter key.
Figure 4-1
2. An Enter Network Password window, shown in Figure 4-2a, will appear.
(Windows XP users will see a Connect to 192.168.1.1 window, shown in
Figure 4-2b.) Leave the User Name field empty, and enter admin (the
default password) in lowercase letters in the Password field. Then, click the
OK button.
Figure 4-2a
Figure 4-2b
17
Advertisement
Table of Contents
