Electrolux EUF2744AOW User Manual page 33

4
9.5 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
9.6 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
CAUTION!
To carry out the following
operations, we suggest that
this be made with another
person that will keep a firm
hold on the doors of the
appliance during the
operations.
1. Remove the upper hinge cover with a
screwdriver.
2. Open the door and remove the door
end cap cover.
3. Remove the top front covers on both
sides. (1)
4. Unplug the cable connector of the
display. (2)
2
1
3
1
5. Unscrew the hinges and remove the
door.
6. Remove the plugs of the middle
crossbeam.
7. Remove the cover with the help of a
tool.
8. Unscrew the lower hinge pivot (E) and
the spacer (F) and place them on the
opposite side.
33
ENGLISH
2