Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7350-K913
Summary of Contents for NCR 7350-K913
- Page 1 Kit Instructions NRI Eagle Coin Acceptor Upgrade 7350-K913 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a customer’s installed software exactly.
-
Page 3: Revision Record
Revision Record Issue Date Remarks Jun 2021 First issue... -
Page 5: Kit Contents
NRI Eagle Coin Acceptor Upgrade This publication provides procedures for upgrading the existing Money Controls SR5i Coin Acceptor in the NCR SelfServ™ Checkout (7350) with NRI Eagle Coin Acceptor. Kit Contents Part Number Description 497-0530735 7350-K913 Kit, NRI Eagle Coin Upgrade 497-0503931... -
Page 6: Installation Procedure
NRI Eagle Coin Acceptor Upgrade Installation Procedure To upgrade the Money Controls SR5i Coin Acceptor in the NCR SelfServ™ Checkout (7350) to an NRI Eagle Coin Acceptor, follow these steps: 1. Turn off the NCR SelfServ Checkout software and hardware systems. 2. Unlock and open the SelfServ CheckoutCore Door. For more information, refer to Opening Core Door on the facing page. - Page 7 NRI Eagle Coin Acceptor Upgrade Opening Core Door To open the Core Door, follow these steps: 1. Use the finger access on the small door to access the door locks, as shown below: 2. In the middle keyhole, insert a key. 3.
- Page 8 NRI Eagle Coin Acceptor Upgrade 4. Turn the Door Latch Handle upward and then pull to open the Core Door.
- Page 9 NRI Eagle Coin Acceptor Upgrade Removing Money Controls SR5i Coin Acceptor To remove the Money Controls SR5i Coin Acceptor, follow these steps: 1. Lift the green latch and rack out the Bulk Coin Recycler from the unit until it is fully extended.
- Page 10 NRI Eagle Coin Acceptor Upgrade b. Remove the six (6) captive screws securing the main cover to the Bulk Coin Recycler chassis. c. Feed the Coin Acceptor Manifold cable through the hole in the cover. d. Lift cover off the Coin Recycler. 3.
- Page 11 NRI Eagle Coin Acceptor Upgrade 4. Do the following: a. Disconnect the other end of the manifold cable from the Coin Acceptor Chute Opto PCB, as shown in the image below. Note: Ensure to remove the cable from the reclosable clip. 5.
- Page 12 NRI Eagle Coin Acceptor Upgrade Removing Money Controls SR5i Coin Acceptor from Metal BCR (BCR 106) To remove the Money Controls SR5i Coin Acceptor, follow these steps: 1. Lift the green latch and rack out the Bulk Coin Recycler from the unit until it is fully extended.
- Page 13 NRI Eagle Coin Acceptor Upgrade 3. Disconnect the following cables from the Coin Acceptor and the Bulk Coin Recycler, as shown in the image below. 4. Release the red tab on the right side of the Coin Acceptor and pull acceptor toward you.
- Page 14 NRI Eagle Coin Acceptor Upgrade Installing NRI Eagle Coin Acceptor To install the NRI Eagle Coin Acceptor, follow these steps: 1. Insert the NRI Eagle Coin Acceptor into the Coin Recycler unit. Note: Ensure that the NRI Eagle Coin Acceptor is aligned with the guides on the BCR and that it is secured in place by the red tab.
- Page 15 NRI Eagle Coin Acceptor Upgrade Installing NRI Eagle Coin Acceptor in Metal BCR (BCR 106) To install the NRI Eagle Coin Acceptor, follow these steps: 1. Insert the NRI Eagle Coin Acceptor into Coin Recycler unit. Note: Ensure that the NRI Eagle Coin Acceptor is aligned with the guides on the BCR and that it is secured in place by the red tab.
-
Page 16: Routing Cables
NRI Eagle Coin Acceptor Upgrade Routing Cables To route the Eagle Coin Acceptor cables in a Plastic BCR (BCR 206), follow these steps: 1. Connect the manifold cable from to the Coin Acceptor Chute Opto PCB, as shown in the image below. Note: Ensure to secure the cable to the reclosable clip. - Page 17 NRI Eagle Coin Acceptor Upgrade 4. Connect the three (3) cable connectors to the Coin Acceptor and Manifold.
- Page 18 NRI Eagle Coin Acceptor Upgrade Closing the Core Door To close the Core Door, follow these steps: 1. Push the Core Door to the core cabinet and then turn the Door Latch Handle downward to lock the door. 2. In the middle keyhole, turn the key counterclockwise to completely lock the Core Door.
- Page 19 NRI Eagle Coin Acceptor Upgrade...