Advertisement
Quick Links
Advertisement
Related Manuals for NCR 7364-K355
Summary of Contents for NCR 7364-K355
- Page 1 Kit Instructions Coin Overflow Bin 7364-K355 Issue A...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
-
Page 3: Revision Record
Revision Record Issue Date Remarks Nov 2018 First Issue... -
Page 4: Kit Contents
Coin Overflow Bin This publication provides procedures for installing a Coin Overflow Bin in an NCR FastLane SelfServ™ Checkout (7364) R6-G unit. Kit Contents Part Number Description 497–0523751 7364–K355 Coin Overflow Bin 497–0521947 Coin Overflow Bin Assembly 497–0522515 Coin Overflow Bin Chute 006–8622623... -
Page 5: Installation Procedure
7364-K355 Coin Overflow Bin Installation Procedure Installing the Coin Overflow Bin in an R6-G unit involves the following procedures: A. Removing the existing Coin Recycler (Glory CI-10C). For more information, refer to Removing Coin Recycler (Glory CI-10C) on the facing page. - Page 6 Removing Coin Recycler (Glory CI-10C) To remove the Coin Recycler (Glory CI-10C), follow these steps: 1. Turn off the NCR FastLane SelfServ Checkout software and hardware systems. 2. Open the Core Door by doing the following: a. Insert key into lock on door latch and turn key clockwise.
- Page 7 7364-K355 Coin Overflow Bin 3. Push the green latch to the right and then rack out Coin Recycler (Glory CI-10C) from the cabinet. 4. Disconnect the power and communication cables from the Coin Recycler (Glory CI- 10C).
- Page 8 7364-K355 Coin Overflow Bin 5. Do the following: a. Remove four screws securing the Coin Recycler (Glory CI-10C) on the Coin Recycler Tray. b. Lift and then remove the Coin Recycler (Glory CI-10C) from the Coin Recycler Tray. Caution: The Coin Recycler (Glory CI-10C) weighs approximately 45 kgs.
- Page 9 7364-K355 Coin Overflow Bin Installing Coin Overflow Bin To install the Coin Overflow Bin, follow these steps: 1. Remove the existing Coin Recycler (Glory CI-10C). For more information, refer to Removing Coin Recycler (Glory CI-10C) on page 3. 2. Do the following: a.
- Page 10 7364-K355 Coin Overflow Bin 3. Pass the Coin Overflow Bin cable through the hole of the Coin Recycler tray as shown in the image below. 4. Re-install the Coin Recycler (Glory CI-10C) on the Coin Recycler tray and secure it...
- Page 11 7364-K355 Coin Overflow Bin 5. Remove three screws from the side of the Coin Recycler (Glory CI-10C) to open the side cover as shown in the image below. 6. Connect the Coin Overflow Bin cable to the Coin Recycler (Glory CI-10C) connector...
- Page 12 7364-K355 Coin Overflow Bin 7. Secure the side cover of the Coin Recycler (Glory CI-10C) using three screws. 8. Connect the power and communication cables to the back of the Coin Recycler (Glory CI-10C).
- Page 13 7364-K355 Coin Overflow Bin 9. Push the Coin Recycler (Glory CI-10C) back into the Core Cabinet. 10. Close and lock the Core Door.