Advertisement
REVERSING THE DOOR
This appliance has the capability of opening the door from either the left or right
side. The appliance is delivered to you with the door opening from the left side.
To change the opening direction, please follow the below instructions. Be sure to
unplug the appliance to change the door.
WARNING:
To ensure correct reliable operation of the refrigerator, contact an
authorised service agent to reverse the door for you. Incorrect installation of the
door may result in damage and excessive wear on refrigerant components.
1. Remove the upper cover (4 screws) and remove the upper hinge (3 screws).
2. Remove the upper door and place in a safe position where it wont get damaged.
3. Remove the pin under the upper hinge and screw it into the opposite side.
4. Remove the middle hinge
5. Remove the lower door and place in a safe position so it doesnt get damaged.
6. Take the middle hinge hole covers from the left side of the appliances and fit
them into the holes where the middle hinge has just been removed.
10
Advertisement
