Table of Contents
Advertisement
REVERSING THE DOOR
This appliance has the capability of opening the door from either the left or right
side. The appliance is delivered to you with the door opening from the left side.
To change the opening direction, please follow the below instructions. Be sure to
unplug the appliance to change the door.
1. Remove the upper hinge cover
2. Remove the two screws
to the frame. Take away the upper hinge (5).
3. Lift the door and place it on a padded surface to prevent scratching it.
4. Remove the two screws
remove the hinges
5. Remove the left front leg
6. Remove the hole cover plate
7. Before placing this lower hinge
rection of the lower hinge
of the lower frame with two screws (8).
8. Insert the bolt-pin
9. Set the door into place making sure the door seals at the lower hinge (2).
10. Hold the door in the closed position and secure the top hinges
frame of the left side with the two screws (1). Do not over tighten the two
screws. Only tighten until the top of the door is levelled with the counter top.
11. Install the upper hinge cover
10
(6)
first.
(1)
that hold the upper hinge
that hold the lower hinge
(8)
(2).
(4)
and transfer it to the right side.
to the right side.
(7)
remove the bolt-pin (9) and reverse the di
(2),
(2).
Then install the lower hinge (2) onto the left side
(9)
to the lower hinge (2).
(6)
on the upper hinge.
(5)
(right side)
and then
(2)
(5)
to the top
Advertisement
Table of Contents
