1. Basic safety information
WARNING
Danger of death through electric shock or fire!
Installation should only be carried out by a
¾
¾
qualified electrician!
L Due to continuing technical progress, abnormalities in
dimming response or radio interference cannot be ruled
out when operating dimmed lamps (in particular LEDs)
L In order to achieve a good result, several dimmable LEDs
should always be of the same type.
•
The flush-mounted universal dimmer conforms to EN
60669-2-1 if correctly installed
2. Proper use
•
The universal dimmer switches and dims the brightness
of different lamps such as bulbs, high-voltage halogen
lamps, low-voltage halogen lamps (conventional or with
electronic transformer) or dimmable LED lamps for 230 V
as well as fans
•
The brightness can be adjusted by using the buttons
connected to the dimmer and/or via app
•
The universal dimmer is equipped with a "gentle" lamp
conserving function for switching on and off, automa-
tic detection of the load type, overheating protection
against overload as well as short-circuit protection
3