Ctcss Tone - Yaesu FT-65 User Manual

Repeater Shift + - ARS
FUNCTION KEY (bottom key with 2 lines) for navigating multi-selection menus.
• Press and hold the FUNCTION key
o Enters the menu list
o Backs out of the numbered menu item
• Press the FUNCTION key
o Selects an item in the menu list
o Goes into or out of the menu sub selection
Menu item 24 REPEATER allows you to change all repeater settings on one screen.
ARS : ON, OFF automatic repeater shift
MODE : SIMPLEX, +REP, -REP This is for manual setting of shifts
Mode is ignored if ARS is ON
SHIFT : Set the MHz shift for a repeater. It is a different number depending on
the band you are in.
VHF 0.600M
UHF 5.00M
Squelch Codes
The FT-65 does allow "split tones" to be set from one menu screen on the radio.
FUNCTION KEY (bottom key with 2 lines) for navigating multi-selection menus.
• Press and hold the FUNCTION key
o Enters the menu list
o Backs out of the numbered menu item
• Press the FUNCTION key
o Selects an item in the menu list
o
Goes into or out of the menu sub selection
8 CTCSS

CTCSS TONE

TX : 100.0Hz
RX : 100.0Hz
The settings in menu items 8 and 11 are
activated by the setting in menu item 29.
FUNCTION then P3 accesses menu item 29 SQL TYPE.
Yaesu FT-65 User Manual
11 DCS CODE
DCS CODE
TX : OFF
RX : OFF
Bold is most common
29 SQL TYPE
OFF
R-TONE
T-TONE no RX tone used
TSQL Both TX &RX used
REV TN
DCS Use the DCS codes
PAGER
3