Cobra Marine MR F75 Owner's Manual page 30

DSC Set-Up
Operating Your Radio
Position Request Reply Type
The ability to send your position to another station is an added feature of DSC
radios that have GPS attached. It is handy for rendezvous and rescue situations.
Your CobraMarine ™ VHF radio allows you to choose whether to have the radio
automatically respond to all Position Requests it receives or to alert you to a
Position Request and allow you to choose whether to respond or not —
manual reply.
To Set The Position Request Reply Type:
Position Reply
1. Enter the Settings menu and scroll to
POS RPLY
Up/Down buttons.
2. Press the Call/Set button and observe
the current setting —
Auto/Manual/Exit
3. Use the Up/Down buttons to change the setting.
4. Press the Call/Set button to select the setting.
5. Use the Up/Down buttons to scroll to
6. Press the Call/Set button to return to the
Settings menu.
Individual Directory
DSC calling allows you to call another vessel or station directly if you know its
MMSI number. Your CobraMarine ™ VHF radio allows you to store up to ten (10)
names and their associated MMSI numbers for quick access.
To Enter Or Edit Names And MMSI Numbers
Individual Directory
In The Directory:
1. Enter the Settings menu and scroll to
(individual directory) with the Up/Down buttons.
2. Press the Call/Set button to enter a
memory location (1-10).
Location 01
3. Use the Up/Down buttons to scroll through the
memory locations to one you want to select.
54 English
(position reply) with the
or .
AUTO MANUAL
.
EXIT
INDV DIR
DSC Set-Up
Operating Your Radio
4. Press the Call/Set button to select the memory location.
New Individual
The cursor will begin to blink at the first character under
.
NAME
5. Use the Up/Down buttons to scroll through the character list.
6. Press the Call/Set button to select a character. This will also
move the blinking cursor to the next character under
7. Repeat steps 5 and 6 to enter additional characters —
up to a maximum of nine (9) — for the name.
NOTE
Press the High/Low Power button to backspace
and erase the last selected character.
8. After entering the name, press and hold the Call/Set
button to move the blinking cursor to the first character
under .
MMSI
9. Use the Up/Down buttons to scroll through the number list.
Enter MMSI
10. Press the Call/Set button to select the number and
move the cursor to the next character under
11. Repeat steps 9 and 10 until the nine (9) digit
MMSI is entered.
Next/Exit
12. Press and hold the Call/Set button to move to the
next memory location or exit.
13. Select or
NEXT
If is selected, pressing the Call/Set button will
NEXT
move to the next memory location where another
name can be entered by repeating steps 3 through 11.
If is selected, pressing the Call/Set button
EXIT
will return you to the Settings menu.
You can enter a total of ten (10) names and MMSI
numbers in the directory.
.
NAME
.
MMSI
with the Call/Set buttons.
EXIT
Nothing comes close to a Cobra ® 55